40 to 45 WFT Squeegee

A notched epoxy floor squeegee that meters a consistent 40 to 45 mil wet film thickness (WFT) of epoxy, urethane, polyaspartic and other resinous floor coatings. The notches set the film for you, so the coating goes down evenly across the floor instead of depending on how hard you push.

The 40 to 45 mil notch is for thick, high build coats such as self-levelling and metallic epoxy floors. Check the product data sheet for the wet film thickness your coating calls for. Pour the coating in a ribbon, pull the squeegee through it with the blade flat on the floor, then back-roll to even out the notch lines. Thread it onto a threaded handle (not included), and wear spiked shoes if you need to walk the wet coat.

• Wet film thickness: 40 to 45 mils
• Blade: notched EPDM
• Frame: one-piece polymer
• Handle: threaded adapter (handle not included)
• For epoxy, urethane and polyaspartic coatings
• Sizes: 18" and 24"

Choosing a size

The 18" is easier to control in smaller rooms, around obstacles and along walls. The 24" covers open floor faster with fewer passes.