Cove Trowel 1" Radius, Epoxy Cove Base Trowel

A heavy-duty cove trowel with a 1" radius for forming epoxy cove base where the floor meets the wall. It shapes the cove mortar into a consistent curve, giving a seamless, easy-to-clean transition from floor to wall with no hard corner to trap dirt.

Cove is usually formed after surface prep so the floor coats can carry up onto it as one continuous system. Pack the mortar into the joint, then run the trowel along the wall to set the radius, floor depth and wall height in one pass. The 1" radius gives a fuller, more generous curve; for a different profile, look at the 3/4" radius cove trowel.

• Radius: 1"
• Sizes: 4" x 6" and 6" x 6"
• Wall height: 3 1/2" or 6", each with a 5 3/4" floor depth and a 7 1/2" running width
• Heavy-duty construction

Choosing a size

Both sizes share the same radius, floor depth and running width. Pick by how far the cove needs to run up the wall: 3 1/2" or 6".