Flat Stiff Plastic Squeegee, Epoxy Floor Coating Squeegee

A flat stiff epoxy floor squeegee for spreading epoxy, urethane, polyaspartic and other resinous floor coatings ahead of back-rolling. With no notches, the flat EPDM blade moves material across the floor and pulls it tight, leaving the final film to your technique and the roller.

The stiff blade holds its edge under load, so it pushes heavier and thicker material with less blade flex and gives a firm, controlled pull. For thinner material, or where the blade needs to follow the slab, look at the flat flexible squeegee. If you need a measured film, choose a notched squeegee in the mil range your coating calls for. Thread it onto a threaded handle (not included).

• Blade: flat stiff EPDM
• Frame: one-piece polymer
• Handle: threaded adapter (handle not included)
• For epoxy, urethane and polyaspartic coatings
• Sizes: 18" and 24"

Choosing a size

The 18" is easier to control in smaller rooms, around obstacles and along walls. The 24" covers open floor faster with fewer passes.