News
New: Reaper Diamond Cup Wheels and a Surface Prep & Grinding Category
Eighteen segmented cup wheels in two sizes, three bonds and three grits, so you can match the wheel to the slab instead of making do.
· 2 min read

Grimaldi now carries a full line of segmented diamond cup wheels, the Reaper range, under a new Surface Prep & Grinding category in the catalog.
The range is built around one idea: the bond should match the concrete. Rather than one general-purpose wheel, there are eighteen, so contractors can pick the right wheel for the slab in front of them.
The line-up
Two sizes
5" (125 mm): 12 segments, 6 mm segment height, rated to 12,000 RPM, about 543 g
7" (180 mm): 22 segments, rated to 8,000 RPM, about 1,057 g
Both mount on a 5/8-11 threaded arbor.
Three bonds
Super soft for hard to very hard concrete
Medium for medium-hardness concrete
Hard for soft or green concrete and abrasive overlays
Three grits
6 grit for aggressive coating, mastic and adhesive removal
16 grit for levelling and general profiling
30 grit for a finer profile ahead of a coating
Why it matters
A cup wheel in the wrong bond either glazes over on a dense slab or wears out quickly on a soft one. Having every combination on the shelf means less time fighting the wheel and more predictable wheel life from job to job.
New to choosing bonds? Read our guide, How to Choose a Diamond Cup Wheel: Bond and Grit, in 5 Steps.
Ordering
Wholesale customers will see their account pricing on every wheel. Contractors buying in volume can apply for a wholesale account from the registration page.








