GuideSurface Prep & Grinding · Dust Control & Vacuums · Safety & PPE
A cup wheel spinning at 12,000 RPM deserves two minutes of checks before it touches the slab. Here is the setup, in order.
· 3 min read
News & Guides
Step-by-step guides, product news and real jobs from contractors who coat, grind and prep floors across Canada.
6 articles
GuideSurface Prep & Grinding · Dust Control & Vacuums · Safety & PPE
A cup wheel spinning at 12,000 RPM deserves two minutes of checks before it touches the slab. Here is the setup, in order.
· 3 min read
GuideSurface Prep & Grinding · Dust Control & Vacuums
Thin coatings, mastic and adhesive come off fastest with a 6 grit cup wheel, then a finer grit to leave the right scratch. Here is the order of work.
· 4 min read
GuideSurface Prep & Grinding · Floor Coating
Three defects that look alike and come from different places. How to read each one, the checks and habits that stop them before the kit is opened, and the repairs that hold.
· 11 min read
GuideSurface Prep & Grinding · Dust Control & Vacuums · Safety & PPE
Grinding concrete releases silica dust, and WorkSafeBC expects a plan for controlling it. Here is what that means on a floor prep job, in plain terms.
· 4 min read
GuideSurface Prep & Grinding · Floor Coating
Scraping is the cheapest step in surface prep and the one that saves the grinder the most work. Four scrapers, four jobs: here is which one to pick up.
· 3 min read
GuideSurface Prep & Grinding · Dust Control & Vacuums
The wrong bond glazes on a hard slab or burns through segments on a soft one. Here is how to match the wheel to the concrete in front of you.
· 3 min read