GuideFloor Coating
A cove base turns the hard corner where floor meets wall into a smooth curve the coating can run straight up. Here is how to prep, pack, trowel and coat one so it looks like part of the floor.
· 3 min read
News & Guides
Step-by-step guides, product news and real jobs from contractors who coat, grind and prep floors across Canada.
10 articles
GuideFloor Coating
A cove base turns the hard corner where floor meets wall into a smooth curve the coating can run straight up. Here is how to prep, pack, trowel and coat one so it looks like part of the floor.
· 3 min read
GuideSafety & PPE · Floor Coating
A flake floor is a sequence of jobs, and each one has its tool. Here is the full kit, in the order you will use it.
· 4 min read
GuideSqueegees & Spreaders · Floor Coating
A notched squeegee meters the film. A flat one spreads and pushes. Knowing which job you are doing picks the blade.
· 3 min read
GuideSqueegees & Spreaders · Floor Coating
One simple number turns a data sheet's mil rating into gallons or litres. Here is the formula, a ready reference chart and a worked garage example.
· 4 min read
GuideSurface Prep & Grinding · Floor Coating
Three defects that look alike and come from different places. How to read each one, the checks and habits that stop them before the kit is opened, and the repairs that hold.
· 11 min read
GuideSafety & PPE · Floor Coating
Spiked shoes let you walk back into a wet floor to roll, broadcast or fix a spot without leaving a mark. Here is how to fit them, walk in them and keep them working.
· 3 min read
GuideFloor Coating
Cold slab, damp air, short days. Here is how to keep epoxy flowing, curing and blush-free when you coat a BC shop in winter.
· 3 min read
GuideSurface Prep & Grinding · Floor Coating
Scraping is the cheapest step in surface prep and the one that saves the grinder the most work. Four scrapers, four jobs: here is which one to pick up.
· 3 min read
GuideFloor Coating
A lint-free cover in the right nap is the difference between a clean, even film and a floor full of fibres and roller marks. Here is how to set up a roller for epoxy.
· 3 min read
GuideSqueegees & Spreaders · Safety & PPE · Floor Coating
The notch sets the film thickness, not your arm. Pick the right mil rating, pour, pull, back-roll and walk it without leaving a mark.
· 3 min read